Double Chamber Combined Glass Toughening Machine
|FOB Price:||Get Latest Price|
|Min. Order:||1 Set|
|Production Capacity:||4 Set/ Month|
|Payment Terms:||L/C, T/T|
- Model NO.: PG2442-T-2
- Certification: ISO
- Control System: PLC
- Glass Edging Machine Type: Flat Tempering Furnace
- Heating Method: Top Convection Heating
- Heating Balance: Yes
- Blower: 2 Sets
- Screen: Philips
- Application: Architecture, Furniture, Automobile, Household Ap
- Specification: CE
- HS Code: 8419899090
- Type: Glass Tempering Furnace
- Structure: Horizontal
- Glass Washing Machine Type: Horizontal Glass Tempering Furnace
- Condition: New
- Heating Chamber: 2
- Convection: No
- PLC: Omron
- Voltage: 380V
- Trademark: Timbery
- Origin: Guangdong
Max. glass dimension: 2440mm×4200mm
Min. glass dimension: 300mm×200mm
Glass thickness range: 4-19mm
Install power capacity: 1100kva
Glass quality: Flatness≤ 0.2 %
Other quality standard will refers to GB/T15763.2-2005
Power consumption: ≤ 2.9kwh/m²(Calculated by 5mm float glass ,80% loading rate)
Production: 221m²/h(Technology information are calculated by 80% loading rate 5mm) float clear glass.
Types of glass
1. Clear float Glass
2. Body Tinted Float Glass
3. Single Side Screen-printed Glass
4. Figured Glass
1. Combined glass tempering furnace had two heating sections radiation and heating balance, which can be smaller temperature difference. Better quality( flatness, optics, granularity) if first heating section works as preheating furnace, which will largely reduce quality defects as optical distortion, spherical bent, hot spots, white haze, etc. Higher production and lower energy consumption will meet mass production customers' requirement.
2. Radiant panel installed in heating chamber, which can avoid broken glass drop and damage heating element and ensure the heat inside chamber is absorbed by glass evenly. It is also convenience for the heating parts maintenance.
3. The heating chamber transmission adopts double round belt, orthogonal setting, which can ensure the stable running. High quality of aluminum silicate insulation scientifically sorting and precision cutting technology, it can be improved the heat efficiency and keep the low temperature outside of the furnace.
4.The alloy sections and steel sheet is card slot design & cold riveted double protection design, which can avoid deformation of heat welding and high pressure long time condition. Air platoons can be adjusted in up-down, left-right, front-back these 6 position for multi-angle adjustment , it can make glass cooling effect is the best.
5.Exclusive new radial arch design & adjustable plate inside design can aggregate the high pressure better. So high pressure air can distribute uniformity that ensures glass flatness will be better.
6.Blower will automatically adjust to Zero Frequency in 60s before glass going out. This design will save more electricity consumption than 20Hz frequency.
7.Pass section is design for 4mm glass, use 2 blower for cooling glass. When 4mm glass come out from heating chamber, big blower will open to quenching glass in pass section, after few second, big blower switch off and small blower on, glass transfer to cooling section for cooling. Advantage of pass section is 4mm glass can be full loading area, so production will be 50% higher than only use one bigger blower but half loading area. What is more, this design can be lower installation power and 60% energy saving for quenching.
90 days after received the deposit payment.
Installation, commissioning for 20 days.
1-2 engineers for installation guidance, commissioning and training free.
Provide operation manuals, including electric diagrams, guidance of operation and maintenance, main process parameter setting.
1 year warranty.(Warranty start from finishing commissioning.)
Seller will be responsible for the non-artificial damage devices (not including wearing parts), provide technical services and spare parts, and assist to solve the problems during production. Seller should give assistance buyer to solve the problem timely when failures happen.
Received customer failure report will response rapidly:
1: Based on customer's description, solve problem by telephone or E-mail try to resolve issues as soon as possible.
2: If we can't solve machine problem by telephone , our customer service center will promptly sent our technician to customer's factory to supply full solution for solving this trouble.