1250*4000mm Double Heating Chamber Flat Tempered Glass Furnace Making Machine

• Type: Glass Tempering Furnace
• Certification: ISO
• Structure: Horizontal
• Control System: PLC
• Model No: Tg1240-2
• Max Loading Dimension: 1250*4000mm
• Model NO.: TG1240-2
• Thickness: 2.85-12mm
• Application: Architectures Automobile Household Appliance
• Transport Package: Film Packing
• Specification: STEEL
• Trademark: TIMBERY
• Origin: China Foshan,
• HS Code: 8475291900
• Production Capacity: 200 Set/Year

Product Description

Swon Series Flat Glass Double Heating Chamber Tempering Furnace
Application: High grade instrumentation, electrical appliances, interiors decoration, solar glass, furniture, decorative , architecture, building laminated glass,big size glass, etc.

Glass tempering furnaces are designed to make finished pieces of glass both stronger and safer in the event that they break. Glass tempering furnaces heat up a piece of glass to a very high temperature, usually over 600° Celsius, and then rapidly cool it uniformly using air jets, a process called quenching.  The rapid cooling causing the surface of the glass to undergo extreme compression, making it much stronger against impacts and heat shock.  Additionally, due to the intense pressures within the glass, if the glass fails, it shatters into several tiny and relatively spherical pieces, making it much less likely for people to become injured from the shards.

Characteristics

1.Double heating sections can effectively reduce time for heating and running the big blower,so as to achieve the goal of saving energy and the capacity is almost two times of ordinary type.

2.The use of lower temperature entry of the furnace cut down the bad reaction after the glasses enter into the furnace,thus to improve the quality of the surface.

3.The uniformity of different areas of the glass is in favor of doublle chambers Thereby, the tempering quality can be improved and the breakage can be reduced.

 

Double heating chamber can according technological requirements allowing you full flexibility in configuring your heating type, improve the flatness of the glass surface.Double heating design can shorten heating time so it is high production efficiency. 1.5-1.8 times compares to traditional single chamber tempering furnace.The use of lower temperature entry of furnace decrease the bad reaction such as"break in heating chamber" and  "break because of drilling",so breakage can be reduced.Glass quality defects such as Optical distortion, bending spherical, pitting were decreased evidently, ensure glass tempered quality.

 

Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual situation.

1.Equipped with advanced convection system, increased the endothermic efficiency of the surface of the glass by the way of covection.

2.It's benefical to the uniformity of heating the glass through the convection heating.

3.The quantity of the dust inside the furnace can be reduced due to the inner cleading structure of the furnace body.

4.Low-temperature techniques can be used to produce high-quality glass.

Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual situation.

 

Products range is not fully listed here.

For further information, please contact with TIMBERY group.

 

Technical parameter

 

Model

MAX (mm)

MIN (mm)

thickness

m³/h

KVA

TG 0932 - 2	900 x 3200	130 x 60	2.85 - 12	65	≥500
TG 1240 - 2	1250 x 4000	180 x 100	2.85 - 19	113	≥700
TG 1550 - 2	1500 x 5000	220 x 150	2.85 - 19	168	≥900
TG 1655 - 2	1650 x 5500	230 x 150	2.85 - 19	203	≥1100
TG 1680 - 2	1650 x 8000	230 x 150	2.85 - 19	285	≥1100
TG 2050 - 2	2000 x 5000	250 x 100	4 - 19	230	≥1000
TG 2442 - 2	2440 x 4200	300 x 150	4 - 19	230	≥1000
TG 2450 - 2	2440 x 5000	300 x 150	4 - 19	270	≥1250
TG 2460 - 2	2440 x 6000	300 x 150	4 - 19	310	≥1600

Functional Description:

1,All driving systems are round belt construction, Synchronization is more steady and realiable.

2, Cooling section is composed of module parts, each part can be randomly adjusted: height, left&right location. Then it is more easy to make glass flatness better.

3, The blowing angle has been upgraded, the glass surface is very neat and clear.

4, Cooling section up down is controlled by lever lifting, this design could improve lifting precision.

5, Automatic height adjustment, to make sure the cooling section height precision.

6, UPS: If the power is suddenly off, heating chamber could expel the glasses and ensure the ceramic rollers are not dmaged.

7, Long-range control service, malfunction examination and solution.

 

Delivery: 

90 days after received the deposit payment.

Installation, commissioning for 20 days.

Installation: 

1-2 engineers for installation guidance, commissioning and training free. 

Provide operation manuals, including electric diagrams, guidance of operation and maintenance, main process parameter setting. 

Warranty:

1 year warranty.(Warranty start from finishing commissioning.)

Seller will be responsible for the non-artificial damage devices (not including wearing parts), provide technical services and spare parts, and assist to solve the problems during production. Seller should give assistance buyer to solve the problem timely when failures happen. 

After-sell Service

Received customer failure report will response rapidly:

1: Based on customer's description, solve problem by telephone or E-mail try to resolve issues as soon as possible.

2: If we can't solve machine problem by telephone , our customer service center will promptly sent our technician to customer's factory  to supply full solution for solving this trouble.