Timbery Electric Energy Saving Double Heating Chamber Solar Glass Tempering Machine

• Type: Glass Tempering Furnace
• Certification: ISO
• Structure: Horizontal
• Control System: PLC
• Condition: New
• Transport Package: Film Packing
• Model NO.: TG1240-2
• Trademark: TIMBERY
• Origin: China
• HS Code: 8479291900
• Production Capacity: 120 Set/Year

Product Description

Horizontal Electric Radiation Energy Saving Double Heating Chamber Solar Glass Tempering Machine

                                                                 
Characteristics
Double heating chamber can according technological requirements allowing you full flexibility in configuring your heating type, improve the flatness of the glass surface.Double heating design can shorten heating time so it is high production efficiency. 1.5-1.8 times compares to traditional single chamber tempering furnace.The use of lower temperature entry of furnace decrease the bad reaction such as"break in heating chamber" and  "break because of drilling",so breakage can be reduced.Glass quality defects such as Optical distortion, bending spherical, pitting were decreased evidently, ensure glass tempered quality.

Note: All the size are based on millimeter and production are calculated by 5mm float glass at 80% loading rate and 100% finishing rate. The change of equipment configuration will be in accordance with the difference of glass thickness range and environmental factors, it is depend on actual
situation. 
 

Model	MAX (mm)	MIN (mm)	thickness	m³/h	KVA
TG 0932 - 2	900 x 3200	130 x 60	2.85 - 12	65	≥500
TG 1240 - 2	1250 x 4000	180 x 100	2.85 - 19	113	≥700
TG 1550 - 2	1500 x 5000	220 x 150	2.85 - 19	168	≥900
TG 1655 - 2	1650 x 5500	230 x 150	2.85 - 19	203	≥1100
TG 1680 - 2	1650 x 8000	230 x 150	2.85 - 19	285	≥1100
TG 2050 - 2	2000 x 5000	250 x 100	4 - 19	230	≥1000
TG 2442 - 2	2440 x 4200	300 x 150	4 - 19	230	≥1000
TG 2450 - 2	2440 x 5000	300 x 150	4 - 19	270	≥1250
TG 2460 - 2	2440 x 6000	300 x 150	4 - 19	310	≥1600

Application
High grade instrumentation, electrical appliances, interiors decoration, solar glass, furniture, decorative , architecture, building laminated glass,big size glass, etc.


Features of each section
1:Loading tables, heating chamber,flat quenching section and unloading table are installed with independent drive systems, and their own running speed can be automatically controlled by computer. Every mode also can be changed automatically.
2:Heating chamber: On/ off switch is electric control. Up/down quenching section and air pressure balance adjustment : electric control. Overall air pressure adjustment: Computer system control. Blower: converter start-up and control.
3:Function Feature: If sudden power off, emergency glass expelled can be manually operated on the main driving. If under voltage or malfunction, there is automatic alarm.


The effect of glass processing



Technical parameter                                                                                 

 
1. Radiant panel installed in heating chamber, which can avoid broken glass drop and damage heating element and ensure the heat inside chamber is absorbed by glass evenly. It is also convenience for the heating parts maintenance.
 

 
2. The heating chamber transmission adopts double round belt, orthogonal setting, which can ensure the stable running. High quality of aluminum silicate insulation scientifically sorting and precision cutting technology, it can be improved the heat efficiency and keep the low temperature outside of the furnace.
 

 
3.The alloy sections and steel sheet is card slot design & cold riveted double protection design, which can avoid deformation of heat welding and high pressure long time condition. Air platoons can be adjusted in up-down, left-right, front-back these 6 position for multi-angle adjustment , it can make glass cooling effect is the best. 
 

 
4.Exclusive new radial arch design & adjustable plate inside design can aggregate the high pressure better. So high pressure air can distribute uniformity that ensures glass flatness will be better.
 

 
5.Blower will automatically adjust to Zero Frequency in 60s before glass going out. This design will save more electricity consumption than 20Hz frequency.
 

 
6.Pass section is design for 4mm glass, use 2 blower for cooling glass. When 4mm glass come out from heating chamber, big blower will open to quenching glass in pass section, after few second, big blower switch off and small blower on, glass transfer to cooling section for cooling. Advantage of pass section is 4mm glass can be full loading area, so production will be 50% higher than only use one bigger blower but half loading area. What is more, this design can be lower installation power and 60% energy saving for quenching. 

 

Packing and Loading Pictures

 

Delivery

90 days after received the deposit payment.
Installation, commissioning for 20 days.

Installation: 
1-2 engineers for installation guidance, commissioning and training free. 
Provide operation manuals, including electric diagrams, guidance of operation and maintenance, main process parameter setting. 

Warranty:
1 year warranty.(Warranty start from finishing commissioning.)
Seller will be responsible for the non-artificial damage devices (not including wearing parts), provide technical services and spare parts, and assist to solve the problems during production. Seller should give assistance buyer to solve the problem timely when failures happen. 

After-sell Service
Received customer failure report will response rapidly:
1: Based on customer's description, solve problem by telephone or E-mail try to resolve issues as soon as possible.
2: If we can't solve machine problem by telephone , our customer service center will promptly sent our technician to customer's factory  to supply full solution for solving this trouble.

Certification


Warmly welcome to visit, if you are interested in any model, please feel free to contact us
Looking forward to cooperating with you